How to Clean A Vacuum Hose

How to Clean a Vacuum Hose – Things You Should Know

You may get caught up with all the chores and forget your vacuum needs cleaning too. You need to know how to clean a vacuum hose as it is more prone to clogging. A clogged hose may make cleaning harder as there will be no sufficient air to vacuum dirt.

You can avoid regular repairs of your vacuum by maintaining it well through cleaning.  A well-maintained vacuum hose means your vacuum cleaner will serve you for long.

Step by Step Guide on How to Clean a Vacuum Hose


To clean your vacuum hose, you will need the following items :

  • Broom/mop handle
  • Bottle cleaning brush
  • Hot water
  • Bleach/ distilled white vinegar and baking soda
  • Mild detergent
  • Cleaning cloth

Step 1

You need to detach the hose first, but before you do so, switch off the power outlet and unplug the cleaner. It helps avoid shock or the vacuuming turning on when you are detaching it. You can then lay the hose straight on the floor or any flat surface.

Using the broom handle, insert it gently in the hose all the way through. It helps get rid of debris, toys, and other stuffing clogged inside.

We Recommended Broom with Squeegee & Telescoping Handle for this cleaning. Click here to check Price on Amazon

Step 2

After unclogging, you can now wash the hose. You need hot water in a basin or a sink enough to submerge the hose. Put two tablespoons of mild detergent and bleach into the water.

In the solution, insert the hose and swirl it to enable water to get in the innermost parts. Use a cleaning cloth to wash the outside of the hose. Instead of bleach, you can use distilled white vinegar and baking soda at this point to sanitize the hose.

You need two cups of vinegar and baking soda half a cup and mix in some water. Use the solution to pour inside the hose to get rid of bacteria.

We recommended ALINK 5-Pack Bottle Brush Cleaner For cleaning multiple size of hose. Click Here to check price on Amazon


Step 4

Even with all the cleaning in the above steps, you may notice some grime attached in the inside. The dirt is harder to remove if it is in the hard to reach areas and a bottle cleaning brush can help.

Step 5

The dirt is out, it is now time to rinse off. You need a faucet to exert water pressure into the hose to make the rinsing effective. As the water runs through it, shake it around to help remove any remaining dirt.

Step 6

After rinsing, the hose needs to dry out for a couple of hours before fixing it back to the vacuum. The best way to let it dry is by hanging it on a curtain rod or any other line.

Frequently Asked Questions (FAQs)


  • Q: How frequently should I clean the vacuum hose?

A: You can clean it once per month on average. You also need to perform a routine check-up after every use to remove any clogs.

  • Q: Why does my vacuum have a bad smell?

A: The bad smell is a sign that some food particles got trapped inside and started rotting. Cleaning the hose will get rid of dirt and remove the smell.

  • Q: When should I replace my vacuum hose?

A: You may notice the vacuum not picking up dirt or a loss of suction but that should not warrant a replacement. You only need to replace it if you notice an air leak due to a hole in the hose.

Read Also: How to Wash a Car Without a Hose


Nothing is unnerving like a faulty vacuum when you want to start cleaning. To avoid the frustrations, knowing the procedure of cleaning a vacuum hose would come in handy and make the day worthwhile.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top