Cleaning gets easy when you have a functional vacuum at hand. Sometimes your shark vacuum may stop working as usual, meaning that something is amiss. Accumulation of dirt is one reason your vacuum could stop functioning efficiently.
You may not be good in operating machines, nonetheless, that does not mean you have to take your vacuum for repair each time it faults. This guide on how to remove roller brush from shark vacuum will help you reduce visits to the repairers shop. Carefully follow the steps to help you observe safety and bring efficiency back to your shark vacuum.
4 Easy Ways on How to Remove Roller Brush From Shark Vacuum.
- Unplug Your Vacuum From The Power Source
It is for your safety and that of your vacuum. Unplugging it first ensures there will be no electric harm to your body. It also helps stop your vacuum’s engine from running in the process of detaching the roller brush.
- Find The Roller Brush.
Look for the roller brush after detaching the vacuum from the plug. The upright vacuums such as the Shark Navigator Upright Vacuum for Carpet, has the roller brush located at the underside. Lay down the vacuum for easy access to the screws.
Sometimes the screws may have developed rust, get Evapo-Rust, The Original Super Safe Rust Remover. It will help you clear it. With the rust out of the way, removing screws will be quick.
- Screw Removal
The faceplate of shark vacuums is held in place by several screws. You need a screwdriver that comes with the vacuum cleaner in the toolkit to unscrew it. Using a wrong screwdriver can cause screws to enlarge or damage them.
If you do not have the original screwdriver for the vacuum, you can order from an appliance center near you. When ordering, ensure it is compatible with your shark vacuum. You need to have a container to hold your screws to make it easier when fixing it back.
- Remove The Roller Brush.
Once you remove the screws from the faceplate, it will be easier to get the roller brush out. Be careful when detaching the roller brush since there is a belt that keeps it in place.
Removing the brush in a hurry can spoil the belt, and that would warrant a repair or a replacement.
Frequently Asked Questions (FAQ)
- Q: Do I have to remove my roller brush for cleaning?
A: It depends on your vacuum cleaner as some are self-cleaning and thus need no further cleaning. However, if yours is not in that category, you need to remove it occasionally to maintain its efficiency.
- Q: How often should I clean the roller brush?
A: If your house has furry pets that shed heavily, it means the accumulation of dirt in the vacuum is fast. You, therefore, need to keep cleaning the roller brush often.
- Q: How do I ensure the durability of my shark vacuum?
A: Cleaning the vacuum’s roller brush as it accumulates debris is a step in the right direction. You can also replace it if it wears off and ensure you maintain the new one well.
Read Also : How to Clean a Vacuum Hose
Observing safety measures is crucial when removing the roller brush. You intend to remove the dirt that has accumulated over time and not to damage the vacuum or harm yourself.