The dirt devil vacuum has in the recent past become a common part of many households. Hence it is becoming increasingly important that one knows how to take apart a dirt devil vacuum cleaner. This might be so as to get rid of the dirt that might be clogging the vacuum from continuous use.
We understand it might be a little bit tricking taking it apart with no mechanical experience whatsoever. That is why we have detailed stress-free steps on how you can go about it.
Why Take Apart a Dirt Devil Vacuum?
As it is so aptly named, a dirt devil vacuum gobbles up lots of dirt enabling you to keep your home clean. It is thus an important component of home cleaning. However, over time dirt might clog the vacuum and impair its proper functioning. That’s why you need to disassemble it. So as to clean it.
One might also need to disassemble the vacuum whenever it starts acting up and you don’t think the problem is that serious. You know those kinds of problems you have an inkling you can easily solve? Yes, those ones!
But not too many owners of dirt devil vacuums have an idea of how they can easily disassemble them. Meanwhile, you can view the latest model of the dirt devil vacuum on Amazon.
How to Take Apart a Dirt Devil Vacuum Cleaner
The below steps should give you the best guide on how to proceed. All you will need is a screwdriver which is readily available on Amazon.
Take a newspaper or piece of cloth and place it in the area you intend to disassemble the vacuum. This prevents you from messing up your working area and having to clean afterwards.
Remove the battery. Most dirt devil vacuums come with an external battery. You will have to remove it to cut the power source. It is usually on the side of the vacuum. A cable connects this battery to the charger plug.
Remove the vacuums handle and place the machine on the floor. It should lie on its side while the handle’s attachment is facing upwards.
Place the machine on the floor on its side and with the handle attachment facing upwards. Rotate the locking collar counterclockwise using your hands and pull out the handle. Lubrication can always make it easier to rotate the lock if it proves too tight.
Use the screwdriver to remove the screw after rotating the handle to a side with an up-facing screw. Remove all the other screws to taking care not to lose them. Now carefully separate the two sections of the handle into two.
Every dirt devil vacuum has a release button that releases the canister. Place the machine in an upward-facing position and press the button. The canister should easily come off. Empty the canister in a trash can then rinse with water when empty.
Rotate the vacuum to face upwards and place it on the floor in your working area. You have to ensure the brush head faces upwards. Remove the screws on either side of the roll. This detaches the brush head to enable you easily pull the metal plate from the bristles
At this point, the vacuum should have just a few screws left. Removing the screws should enable you to completely pluck out the brush head.
Now you have fully disassembled the vacuums parts, wash them thoroughly then air dry them. Make sure all the water in the vacuum’s components is dried off.
After cleaning and drying all the parts of the vacuum, assembling them back shouldn’t be a problem. Also, pick up the newspaper from your working area and discard it in the trashcan.
Important Points to Note
- When removing the screws with the screwdriver ensure you put them in a safe place. Losing them would mean problems reassembling your dirt devil.
- If you don’t properly air-dry the vacuum before reassembling, the metallic components could rust and impair the functionality of the vacuum.
Read Also: How to Remove Roller Brush From Shark Vacuum
Frequently Asked Questions
- Q: Is taking apart a dirt devil vacuum complicated?
A: No. Taking apart a dirt devil vacuums isn’t that hard. All you have to do is follow the simple steps we have outlined here.
- Q: Do I need to take apart a dirt devil vacuum to clean it?
A: Yes. Too much dirt inside the vacuum might clog it making it inefficient. This is why you need to disassemble it for a good cleaning.
- Q: How do I reset a dirt devil vacuum?
A: To reset a dirt devil vacuum, push the button on the upper left-hand side of the vacuum. That is the reset button.
Read Also: How to Clean a Vacuum Hose
See now? Taking apart a dirt devil vacuum shouldn’t be that hard. The steps we have detailed should help you do it with no stress at all.