There’s no denying using the Swiffer is one of the easiest ways to mop your home quickly. Few people want to deal with the old-fashioned bucket and mop. So, what do you do when you notice the Swiffer WetJet not spraying?
Of course, the first thing you’ll want to know is what’s happening. The Swiffer WetJet, for all its sophistication, is still prone to mechanical issues. So, there can be several reasons that’s happening.
In this article, we highlight the probable causes of the issue and how to fix them.
Do read on.
Why is the Swiffer WetJet Not Spraying?
Your Swiffer WetJet will not spray for two main reasons. First, the WetJet’s nozzles might be clogged with dirt. Second, the Swiffer’s motor could have a problem.
Common Swiffer motor problems include rust, clogging, or a need for lubrication. When the nozzles are clogged with dirt, you’ll often hear the Swiffer’s motor running but no water coming out.
However, when the motor is the problem, you won’t hear a sound when you turn on the Swiffer.
Those aren’t the only reasons the Swiffer WetJet will refuse to spray water. There is one other minor reason: the batteries.
The Swiffer WetJet uses four AA batteries to power the motor, enabling it to spray water through the nozzles. So, if your Swiffer has old batteries, it won’t spray.
How can you fix these problems, though?
1. Replace the Old Batteries with New Ones
This is quite obvious, eh? To rule out batteries being the problem, get new AA batteries and replace the old ones. That helps you know if it’s a bigger issue with the Swiffer or only the depleted batteries.
But if, after replacing the batteries and you notice the motor starts, but no water comes out of the nozzles, try to unclog them.
Here is how.
2. How to Unclog Swiffer WetJet
Whenever you suspect it’s the nozzles that are clogged, troubleshooting the issue is simple. Bombard the two nozzles with a steady stream of water. The perfect tool to use here is a water hose.
Point the water hose at a maximum pressure at the Swiffer water jets nozzles, then spray. That will unclog the water nozzles, and the water will start coming out when you test it. Have a look at this YouTube video to see how easy it is.
If you don’t want all that work, you can choose a simpler alternative. Take a spin or a toothpick and unstuff the nozzles of all their dirt. Poke the holes repeatedly, then try spraying water through the nozzles again.
Alternatively, you can pour a mixture of vinegar and warm water on the nozzles. Mix a small amount of vinegar and warm water in a glass of water, then pour it on the nozzles.
Vinegar is excellent at eating away caked debris.
The above hacks should help if clogged nozzles are the problem, but what if the nozzles are, okay? You’ll see no change despite trying the above fixes if the nozzles are okay.
Further proof of that is when you don’t hear a single sound from the Swiffer’s motor. When that happens, then probably, it’s the motor with an issue.
Here is how to fix the Swiffer’s motor.
3. Swiffer WetJet Spray Motor Not Working
As we have already mentioned, the Swiffer WetJet motor won’t work because of rust, clogging from dirt, or the need for lubrication.
When this is the case, you can’t hear a whirring sound when you press on the button. That’s despite you trying all the hacks we have mentioned above.
The fixing process here is more elaborate since you’ll have to open up the WetJet.
Here is what you will need:
- Flathead screwdriver
Lay the Swiffer flat on the floor and replace the bottle that holds the cleaning solution
You’ll see two screws on each side from the bottle’s position. Unscrew them with your screwdriver
Unscrew the mop head from the handle. There is a large screw that holds the two together. That makes it easy to separate the cover’s two halves.
You will now have access to the motor. Pass the flat screwdriver through the small window and turn the motor.
Now take the lubricant and apply it to the turned motor. Apply the grease on the terminals since they might have gotten rust.
After doing all the above, try starting the Swiffer to see if the motor is working fine. A whirring sound when you turn it on should help you know if it’s working.,
If it works, then reassemble the Swiffer. Use the steps you used to open it but in reverse.
With that, you will have successfully solved the issue.
What if The Troubleshooting Methods Don’t Work?
If all the above measures don’t work, get the Swiffer to a specialist. If you still have the warranty, have the mop checked for problems.
If all that fails, you’ll have no other option than to get a replacement.
FAQ About Swiffer WetJet Not Spraying
How long does Swiffer WetJet last?
The WetJet can last for up to six months, but it really depends on how often it is used and how dirty the floors are. Swiffer WetJet is a disposable floor cleaning system. It comes with a bottle of cleaning solution and a disposable mop pad. The mop pad is attached to the bottom of the bottle and when you are done using it, you just throw it away. The cleaning solution will last for about 25-30 uses.
Can you use your own cleaning solution in Swiffer WetJet?
Yes, you can use your own cleaning solution in a Swiffer WetJet. Some people find that this saves them money, as they can use their own cheaper solutions rather than buying the Swiffer-branded solutions. Be sure to follow the instructions for using your own cleaning solution carefully, as you may need to dilute it more or use a different type of cleaner than what is recommended for the WetJet.
Does a Swiffer actually clean?
Yes, a Swiffer can clean surfaces. The Swiffer WetJet is especially effective at cleaning up liquid spills and removing dirt and dust.
How often do you replace Swiffer WetJet pads?
I usually replace my Swiffer WetJet pads every two weeks. Swiffer WetJet pads should be replaced when they start to become less effective at cleaning or when they start to leave debris behind. Depending on how often they are used, this could be anywhere from once a week to once a month.
Why does Swiffer make floors sticky?
Swiffer WetJet is designed to make sweeping and mopping easier by using a jet of water to attach the dirt to the floor, and then a cloth to absorb it. The water leaves the floor sticky, which helps the cloth attach more dirt.
How do you put liquid in a Swiffer WetJet?
The Swiffer WetJet is a mop that uses a mixture of water and cleaning solutions to clean floors. The liquid is put in the tank on the back of the mop, and then the mop can be used to clean floors.
Can I use Pine Sol in my Swiffer?
Pine sol is a great product to use in your Swiffer. It helps to cut through the dirt and grime and leaves your floors looking and smelling clean.
Where is the battery for Swiffer WetJet?
The battery for the Swiffer WetJet is located in the handle of the device. The battery powers the motor that propels the cleaning solution out of the WetJet. The battery is a rechargeable NiMH battery and can be removed from the handle for charging.
Is it better to use a mop or Swiffer?
Mops are better than Swiffers for a few reasons. Swiffers are disposable and only last for a certain number of uses, while mops can be washed and reused. Swiffers also require special cleaning solutions which can be expensive, while mops can be cleaned with just water. Finally, mops are generally larger than Swiffers and can cover more surface area in a shorter amount of time.
Will Swiffer ruin hardwood floors?
There is no definitive answer to whether or not Swiffer products will ruin hardwood floors. Some experts believe that the cleaning chemicals in Swiffer products can dull the finish on hardwood floors over time, while others claim that using a Swiffer will actually protect the floor from dirt and dust buildup. Ultimately, it is up to the individual homeowner to decide whether or not they feel comfortable using a Swiffer on their hardwood floors.
Is Swiffer WetJet safe for pets?
Most experts agree that Swiffer WetJet is generally safe for pets, as long as it is used in accordance with the product’s instructions. For example, it is important not to let the pet drink from the water that has been used to clean floors with the Swiffer WetJet, as this could lead to gastrointestinal problems.
Can you refill a Swiffer Wet Jet bottle?
The Swiffer Wet Jet bottle is designed so that it can be refilled with a cleaning solution. The top of the bottle screws off, and the inside is designed so that the cleaning solution can be poured in. The bottle also has a small hole on the bottom so that the cleaning solution can be dispensed as needed.
If you see your Swiffer WetJet not spraying, the culprits are a problematic motor and dirt in the dirt nozzles. It is easy to fix the issues with the steps outlined here. But if they persist, then you’ll have to contact a specialist.
Your WetJet shouldn’t trouble you that much if you unclog the nozzles regularly. Do that and see how easy a time you have with the WetJet.
- How to Wash Spin Mop Head in Washing Machine
- Can I Use Vinegar in My Shark Steam Mop – 3 Steps You Should Know
- Can You Use A Steam Mop on Vinyl Flooring?
- Can You Use the Bissell CrossWave as Just a Vacuum?
- Where To Dump Mop Water – Things That You Must Know
- Top 7 Best Mop for Dog Hair Reviews & Buying Guides