Dyson v10 Not Working After Cleaning Filter – (4 Methods to Check)

Dyson v10 not working after cleaning filter

Dyson has been in the business of vacuum cleaners for over 50 years and they are known for their high quality and innovative products. One of their most popular models is the Dyson v10. After cleaning the filter on this vacuum cleaner, many users have reported that the machine no longer works.

Some believe that this is caused by a build-up of debris on the filter, which prevents the machine from taking in air and vacuuming.

If your Dyson V10 is not working after you cleaned its filter, there may be a problem with the machine’s power cord. This issue can usually be resolved by replacing the cord. If that doesn’t help, there may be a problem with the machine itself.

Dyson v10 not working after cleaning filter. Get the solution right here.

Dyson v10 at a Glance

The Dyson v10 is a new vacuum cleaner released in 2019. It has many features that set it apart from other vacuum cleaners on the market. 

One of the most notable features of the Dyson v10 is its ability to separate and filter allergens like pet dander and dust mites. This is a huge benefit for people with allergies, as they can now vacuum without causing any problems. 

Another great feature of the Dyson v10 is its HEPA filter. This filter is highly effective at removing particles such as dirt, dust, and cat hair. However, like other filters, it can become clogged over time. 

Overall, the Dyson v10 is an excellent vacuum cleaner that offers many benefits for allergy sufferers and others who want to clean their homes more effectively.

Flagship Dyson V10 Allergy HEPA Cordless Stick Vacuum Cleaner, Bagless Ergonomic, Lightweight, Powerful, Whole-Machine Filtration, Rechargeable Battery, Long Battery Life, one Hubxcel Microfiber Cloth
  • 【Dyson V10 Cordless Design + Powerful Suction】Powered by the...
  • 【Long Battery Life】 Using the built-in battery, without any...
  • 【Whole-machine HEPA filtration】Certified by the Asthma and...

Last update on 2022-09-18 / Affiliate links / Images from Amazon Product Advertising API

Causes of Dyson v10 not working after cleaning filter

There are a few common causes of Dyson v10 not working after cleaning the filter. One is that the filter may be blocked, which will cause the vacuum to stop working. Another reason is that the filter may be dirty and needs to be cleaned. Finally, debris can accumulate overtime on the filters and need to be cleaned as well in order for the vacuum to operate at its best.

  • The filter is dirty
  • The filter is not installed correctly
  • The filter is clogged
  • The dustbin is full
  • The motor is overheating
  • There is something blocking the airflow

Solutions to Dyson v10 not working after cleaning filter

One of the common problems with the Dyson v10 is that it does not seem to work after cleaning the filter. There are a few solutions that may help with this problem. 

First, make sure that you have properly cleaned the filter and that any residual debris has been removed.

Next, check to see if there is any obstruction in the machine’s internal workings. This can include things like kinks or knots in the cord or filter, or anything else that may be blocking airflow. 

Finally, try resetting the machine by pressing and holding down both of its buttons for three seconds each.

Cleaning the Filter

If your Dyson v10 is not working after you clean the filter, there could be a problem with the air filter. Here’s how to clean it:

  1. Unplug the vacuum cleaner. 
  2. Remove the cover of the air filter. 
  3. Wash the filter in warm water and a mild detergent. 
  4. Rinse it well and place it back on top of the vacuum cleaner. 
  5. Replace the cover and plug in the vacuum cleaner.

Wet Filter

If your Dyson vacuum cleaner is not working after cleaning the filter, there may be a filter issue. Sometimes people accidentally insert the wet filter into the vacuum after cleaning the filter. To check for a wet filter, follow these steps: 

  1. Remove the dirt cap and turn on the vacuum cleaner. 
  2. Observe the suction power and check for any clogged or dirty filters. If there are no issues, replace the dirt cap and continue to step 3. 
  3. If there are any problems with suction or filters, check to see if water is leaking from anywhere on the vacuum cleaner. If so, replace the wet filter. 
  4. Reconnect all of the wires and reset the vacuum cleaner according to the manufacturer’s instructions.

Motorhead Failed

If your Dyson v10 vacuum cleaner is not working after you clean the filter, there’s a good chance that Motorhead has failed. To check for Motorhead failure, follow these steps: 

  1. Change the bag on your vacuum cleaner. If Motorhead still fails after you do this, it’s likely that the motor has failed. 
  2. Inspect the power cord for damage or signs of overheating. If there is damage to the cord or if your vacuum cleaner is overheating, it may be due to Motorhead failure. 
  3. If all else fails and you still believe that Motorhead has failed on your vacuum cleaner, you may need to replace the entire unit.

Checking for Blockages

If your Dyson v10 is not working after you have cleaned the filter, there may be blockages. To check for blockages, follow these steps: 

  1. Remove the dirt and debris from the vacuum cleaner’s filter. 
  2. Check to see if any of the fibers from the filter are visible on the outside of the vacuum cleaner’s housing. If so, there may be blockages in the vacuum cleaner’s filtration system. 
  3. Disconnect and examine all of the vacuum cleaner’s hoses and tubes. If there are any blockages, they will likely show up on these parts of the machine. 
  4. In order to clear any blockages, you will need to take apart your vacuum cleaner and clean each part individually.

FAQ About Dyson v10 not working

How do I reset my Dyson V10?

To reset your Dyson V10, you must first turn it off. Next, hold down the trigger and the power button simultaneously for about five seconds. Once the buttons have been held down for a few seconds, release them both and wait for the machine to turn on.

Why does my Dyson keep flashing filter after cleaning?

Your Dyson is flashing the filter warning because it has detected that the filter is not clean. This means that the filter is not trapping dirt and dust like it is supposed to, which could cause your vacuum cleaner to work less effectively. To fix this, you will need to clean the filter properly.

Does Dyson vacuum have a reset button?

Dyson vacuum cleaners do not have a reset button. This is because they are designed to be self-reliant and not require any user input or maintenance in order to continue functioning. If there is a problem with the vacuum cleaner, Dyson customer service will be able to help resolve the issue.

How do you fix a Dyson that won’t turn on?

The first step in fixing a Dyson that won’t turn on is to make sure that it is plugged in and that the outlet is working. If it is plugged in and the outlet is working, then the next step is to check the power cord for any damage. If the power cord is damaged, then it will need to be replaced. If the power cord is not damaged, then the next step is to check the fuse box for any blown fuses.

Is there a fuse in a Dyson vacuum?

There is not a fuse in a Dyson vacuum. Instead, there is a thermal cut-off switch that is designed to protect the motor in the event of an overheating. If the motor temperature rises above a certain threshold, the thermal cutoff will activate and shut off power to the motor. This prevents the motor from being damaged due to overheating.

What should I do if my Dyson has a clogged filter?

If your Dyson has a clogged filter, you should first try to unclog it using a vacuum cleaner hose. If that doesn’t work, you can try using a vacuum cleaner brush to clean the filter. If that doesn’t work, you can try using a vacuum cleaner crevice tool to clean the filter. If that doesn’t work, you can try using a vacuum cleaner dusting brush to clean the filter.

What should I do if my Dyson is making noise?

If your Dyson is making noise, it is likely that there is something wrong with the machine. In order to fix the problem, you will need to take the machine apart and troubleshoot the issue. It is important that you are familiar with how your Dyson works before attempting to fix it, as improper repairs can often make the problem worse. If you are not comfortable fixing the machine yourself, you can take it to a technician for assistance.

In The End

In conclusion, it is clear that there are some things that people should do before they clean their Dyson v10 filters in order to avoid having the vacuum cleaner not work after cleaning the filter.

One should read the discussion above so that they are aware of these things. Following these tips should help people have a better experience when cleaning their Dyson v10 filters.

Relevant Resources:

  1. Do Dyson Vacuums Have HEPA Filters?
  2. Miele Triflex Vs Dyson V11 – Which One Is The Best 
  3. Why Is Dyson So Expensive? Best 6 Reasons Why
  4. Dyson Brush Bar Not Spinning – 6 Causes and How to Fix Them
  5. 7 Best Vacuum With Retractable Cord
  6. Top 11 Best Lightweight Vacuum Cleaners for Elderly
  7. Top 5 Best Central Vacuum System for Pet Hair
  8. Top 9 Best Vacuum for Fleas Reviews & Buying Guides

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top